ChimneySaver Water-Base Water Repellent
ChimneySaver Water-Base Water Repellent is a penetrating, V.O.C. compliant, water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Base Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Base Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
- 10 Year Warranty
- VOC Compliant in All States
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence Protection
- Freeze/Thaw Protection
- Can Be Used On Most Vertical, Above-Grade Masonry
ChimneySaver With Stain Blocker
ChimneySaver Water Repellent with Stain Blocker protects masonry chimneys against damage caused when water and waterborne chemicals penetrate the masonry. It will form an invisible barrier that blocks the return of unsightly stains.
- 7 Year Warranty
- 100% Vapor Permeable
- Non-Glossy Look
- Resists Mold and Mildew Stains on Masonry Chimneys
- Efflorescence/Stain Protection
- Freeze/Thaw Protection
Crack & Joint Sealant
Crack and Joint Sealant is a unique, breathable, silicone elastomer. Think of it as a paintable caulk. Use it for sealing minor cracks (up to 1/8”) and defects in mortar joints where the mortar and chimney are otherwise sound. This allows you to easily correct these defects without the time and expense of tuckpointing.
- 10 Year Warranty
- Prevents Leaks Through Mortar Joint Cracks
- Seals Cracks Up To 1/8 Inch
- Compatible With ChimneySaver
- Breathable
- Easy Brush-On Application
- Soap And Water Clean-up
Cre-Away Creosote Remover
Cre-Away can be used to modify third-degree creosote by converting it into a more brittle state that has a different expansion/contraction rate than the flue it is attached to. During heating and cooling cycles, the treated creosote loses its adhesive properties so it can be more easily removed. Creosote and soot build-up in fireplaces or wood stove chimneys can be a fire hazard if it is not properly cleaned and maintained. All chimneys should be inspected and/or cleaned annually by a qualified chimney sweep.
- Effective On All Types Of Creosote
- Helps Prevent Chimney Fires by aiding in the removal of creosote
- Reduces Creosote Odors
- Chimneys Clean Easier and More Completely
- Fast and Easy To Use
Cre-Away Pro Creosote Remover
Cre-Away Pro is a four-component powder that safely and effectively modifies glazed or third-degree creosote so that it can be more effectively removed by chimney sweeping. Cre-Away Pro contains 50% more magnesium catalyst than regular Cre-Away. The Cre-Away Pro Applicator is a more economical way to apply Cre-Away. So if you find yourself using a lot of Cre-Away, try using the Pro Applicator and buying your Cre-Away in our bulk, 25-lb pail.
- Effective On All Types Of Creosote
- Helps Prevent Chimney Fires by aiding in the removal of creosote
- Reduces Creosote Odors
- Chimneys Clean Easier and More Completely
- Contains 50% More Magnesium Catalyst than Regular Cre-Away
CrownCoat Brushable Crown Repair
Because of its unique ‘quick drying,’ water-based technology and its easy brush-on application, CrownCoat Brushable Sealant has become a favorite among chimney professionals. CrownCoat is premixed and can be used wherever a long lasting waterproof membrane is needed. Fill larger cracks and voids with patching cement or high quality caulk, then apply two coats of CrownCoat.
- 15 Year Warranty
- Permanently Flexible
- Completely Cures In 2 – 4 Hours
- Easy Brush-On Application
- Ready to Use
- Environmentally Friendly
CrownPrep Masonry Crown Conditioner
ChimneySaver CrownPrep is a proprietary water-based acrylic conditioner. CrownPrep conditions and consolidates nearly all porous cement/mortar crown washes prior to application of products such as CrownSeal and CrownCoat. CrownPrep is used prior to application of CrownSeal, CrownCoat, and other water-based, mastic-type crown repair products.
- Preps & Consolidates Existing Crowns
- Improves Performance Of Repair Coatings
- Easy Brush Application
- Environmentally Friendly
CrownSaver Crown Repair System
CrownSaver is a cement-based coating used to repair major cracks and gaps in chimney crowns. It creates a waterpoof barrier that prevents water intrusion through chimney crowns.
- 10 Year Warranty
- Strong, Cement-Based Long-Term Repair
- Waterproof Barrier
- Easy Application
- Ready to Use
CrownSeal Trowelable Sealant
CrownSeal is a proprietary elastomeric coating that forms a flexible, waterproof membrane specifically formulated to repair and protect chimney crowns from water intrusion. This thicker material can cover larger cracks in chimney crowns and is applied with a trowel.
- 10 Year Warranty
- Permanently Flexible
- No Bonding Agent Required
- Natural Concrete/Mortar Look
- Ready to Use
- Environmentally Friendly