HeatShield (5)

Cre-Away (2)

ChimneySaver (20)

ACS (3)

Showing 1–24 of 30 results

Show sidebar
Close

ACS Anti-Creo-Soot Creosote Remover

ACS improves safety and efficiency in wood or coal burning stoves, furnaces, boilers, fireplaces, and pellet stoves. Daily use during the heating season will improve heat transfer through the appliance because 1/32” of carbon insulates the same as 2”of asbestos. ACS attacks dangerous creosote and soot, helps prevent chimney fires, and makes the chimney easier to clean. It’s safe for use with catalytic combustors.
  • Attacks Dangerous Creosote and Soot
  • Helps Prevent Chimney Fires
  • Reduces Creosote Odors and Pollution
  • Chimneys Clean Easier and More Completely
  • Reduces Corrosion In Metal and Masonry Chimneys
  • Non-Toxic and Easy to Use
Close

ACS Gas Log Carbon & Soot Remover

ACS Gas Log & Soot Remover works great for clearing up soot on gas logs. Simply spray it on the logs while burning hot and watch the carbon and soot build-up disperse. Not for use on lightweight fiber logs or white birch log sets. It is easy to use and cleans up logs in a snap!
  • Keeps Gas Logs Clean
  • Helps Prevent Black Carbon Accumulating In Firebox
  • Non-Toxic
  • Environmentally Safe
  • Easy To Use
  • Just spray a light mist on the logs while they are burning hot. It’s the fastest and easiest way known to clean gas logs!
Close

ACS Home & Hearth Cleaner

ACS Home and Hearth Cleaner is a commercial strength citrus cleaner. It is a high alkalinity citrus detergent that effectively cuts through smoke and creosote. ACS Home and Hearth Cleaner removes smoke and creosote stains from fireplace glass, hearths, stoves, brick, stone, and more.
  • Strong Cleaning Power
  • Fresh Citrus Smell
  • Safe for Routine Household Use
  • Cuts Through Smoke and Creosote Stains on Masonry Surfaces
  • Phosphate Free
Close

All Weather CrownCoat

All Weather CrownCoat (formerly Cold Weather CrownCoat) is a brushable, elastomeric coating that, when cured, forms a flexible waterproof membrane designed to repair and protect chimney crowns from moisture intrusion. The unique Freeze-Cure™ technology in All Weather CrownCoat allows the product to cure naturally in above freezing temperatures or to undergo accelerated “freeze-curing” in below freezing temperatures.
  • 10 Year Warranty
  • Permanently Flexible
  • Can Be Used In Temperatures to -40° F
  • Easy Brush-On Application
  • Ready to Use
  • Water Based/Environmentally Friendly
Close

Brick & Mortar Cleaner

Brick & Mortar Cleaner is a breakthrough in cleaning masonry. It has the cleaning power of muriatic (hydrochloric) acid, yet when used as directed, it won’t produce toxic fumes or cause burns. Now you can have the cleaning performance of a powerful acid cleaner with an unprecedented level of safety to users and surrounding surfaces.
  • Safer to Use Than Muriatic Acid
  • No Harsh Fumes
  • Not Likely to Cause Acid Burns
  • Same Cleaning Power As Muriatic Acid
  • Removes Rust, Efflorescence and Mortar Spatter
Close

ChimneySaver Multi-Purpose Water Repellent

ChimneySaver Multi-Purpose Water Repellent is a high performance VOC compliant product that's a perfect fit for sealing and protecting brick walls, driveways, sidewalks and patios.
  • 100% breathable silane/siloxane water repellent
  • Protects horizontal and vertical surfaces
  • Waterproofs concrete and masonry surfaces
  • Protects against de-icing salts and chemicals
  • Water-based
  • Great for driveways, sidewalks, patios, chimneys, brick walls, and more
Close

ChimneySaver RTV

ChimneySaver RTV is a clear, solvent-based silicone elastomer formulated for concrete block and other highly porous masonry with minimal altering of the natural appearance.
  • Effective on hard-to-seal surfaces
  • Controls water penetration
  • Controls moisture related staining
  • UV and temperature stable
  • Ten-year warranty on vertical surfaces
  • Provides durable water repellent protection
  • 100% water vapor permeable
  • Bridges hairline cracks
Close

ChimneySaver Solvent-Base Water Repellent

ChimneySaver Solvent-Base Water Repellent is a penetrating water repellent which contains a proprietary modified siloxane. This solvent-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Solvent Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Solvent Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
  • 10 Year Warranty
  • 100% Vapor Permeable
  • Non-Glossy Look
  • Efflorescence/Stain Protection
  • Freeze/Thaw Protection
  • Can Be Used on Previously Treated Surfaces
  • Can Be Used on Driveways and Sidewalks
Close

ChimneySaver VOC Compliant Solvent Base Water Repellent

ChimneySaver VOC Compliant Solvent Base is great for initial treatments and re-applications. It is 100% vapor permeable, which means it won’t trap water vapors that may pass through the bricks when the chimney is in use, unlike other products found in most hardware or home improvement stores. Those products, when applied to a masonry chimney, can actually slow down water vapors as they pass through the chimney, which leads to water damage.
  • 10 Year Warranty
  • VOC Compliant in All States
  • 100% Vapor Permeable
  • Non-Glossy Look
  • Efflorescence/Stain Protection
  • Freeze/Thaw Protection
  • Can Be Used on Previously Treated Surfaces
  • Can Be Used on Driveways and Sidewalks
Close

ChimneySaver Water-Base Water Repellent

ChimneySaver Water-Base Water Repellent is a penetrating, V.O.C. compliant, water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Base Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Base Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
  • 10 Year Warranty
  • VOC Compliant in All States
  • 100% Vapor Permeable
  • Non-Glossy Look
  • Efflorescence Protection
  • Freeze/Thaw Protection
  • Can Be Used On Most Vertical, Above-Grade Masonry
Close

ChimneySaver With Stain Blocker

ChimneySaver Water Repellent with Stain Blocker protects masonry chimneys against damage caused when water and waterborne chemicals penetrate the masonry. It will form an invisible barrier that blocks the return of unsightly stains.
  • 7 Year Warranty
  • 100% Vapor Permeable
  • Non-Glossy Look
  • Resists Mold and Mildew Stains on Masonry Chimneys
  • Efflorescence/Stain Protection
  • Freeze/Thaw Protection
Close

Crack & Joint Sealant

Crack and Joint Sealant is a unique, breathable, silicone elastomer. Think of it as a paintable caulk. Use it for sealing minor cracks (up to 1/8”) and defects in mortar joints where the mortar and chimney are otherwise sound. This allows you to easily correct these defects without the time and expense of tuckpointing.
  • 10 Year Warranty
  • Prevents Leaks Through Mortar Joint Cracks
  • Seals Cracks Up To 1/8 Inch
  • Compatible With ChimneySaver
  • Breathable
  • Easy Brush-On Application
  • Soap And Water Clean-up
Close

Cre-Away Creosote Remover

Cre-Away can be used to modify third-degree creosote by converting it into a more brittle state that has a different expansion/contraction rate than the flue it is attached to. During heating and cooling cycles, the treated creosote loses its adhesive properties so it can be more easily removed. Creosote and soot build-up in fireplaces or wood stove chimneys can be a fire hazard if it is not properly cleaned and maintained. All chimneys should be inspected and/or cleaned annually by a qualified chimney sweep.
  • Effective On All Types Of Creosote
  • Helps Prevent Chimney Fires by aiding in the removal of creosote
  • Reduces Creosote Odors
  • Chimneys Clean Easier and More Completely
  • Fast and Easy To Use
Close

Cre-Away Pro Creosote Remover

Cre-Away Pro is a four-component powder that safely and effectively modifies glazed or third-degree creosote so that it can be more effectively removed by chimney sweeping. Cre-Away Pro contains 50% more magnesium catalyst than regular Cre-Away. The Cre-Away Pro Applicator is a more economical way to apply Cre-Away. So if you find yourself using a lot of Cre-Away, try using the Pro Applicator and buying your Cre-Away in our bulk, 25-lb pail.
  • Effective On All Types Of Creosote
  • Helps Prevent Chimney Fires by aiding in the removal of creosote
  • Reduces Creosote Odors
  • Chimneys Clean Easier and More Completely
  • Contains 50% More Magnesium Catalyst than Regular Cre-Away
Close

CrownCoat Brushable Crown Repair

Because of its unique ‘quick drying,’ water-based technology and its easy brush-on application, CrownCoat Brushable Sealant has become a favorite among chimney professionals. CrownCoat is premixed and can be used wherever a long lasting waterproof membrane is needed. Fill larger cracks and voids with patching cement or high quality caulk, then apply two coats of CrownCoat.
  • 15 Year Warranty
  • Permanently Flexible
  • Completely Cures In 2 – 4 Hours
  • Easy Brush-On Application
  • Ready to Use
  • Environmentally Friendly
Close

CrownPrep Masonry Crown Conditioner

ChimneySaver CrownPrep is a proprietary water-based acrylic conditioner. CrownPrep conditions and consolidates nearly all porous cement/mortar crown washes prior to application of products such as CrownSeal and CrownCoat. CrownPrep is used prior to application of CrownSeal, CrownCoat, and other water-based, mastic-type crown repair products.
  • Preps & Consolidates Existing Crowns
  • Improves Performance Of Repair Coatings
  • Easy Brush Application
  • Environmentally Friendly
Close

CrownSaver Crown Repair System

CrownSaver is a cement-based coating used to repair major cracks and gaps in chimney crowns. It creates a waterpoof barrier that prevents water intrusion through chimney crowns.
  • 10 Year Warranty
  • Strong, Cement-Based Long-Term Repair
  • Waterproof Barrier
  • Easy Application
  • Ready to Use
Close

CrownSeal Trowelable Sealant

CrownSeal is a proprietary elastomeric coating that forms a flexible, waterproof membrane specifically formulated to repair and protect chimney crowns from water intrusion. This thicker material can cover larger cracks in chimney crowns and is applied with a trowel.
  • 10 Year Warranty
  • Permanently Flexible
  • No Bonding Agent Required
  • Natural Concrete/Mortar Look
  • Ready to Use
  • Environmentally Friendly
Close

FlashSeal Elastomeric Flashing Sealant

FlashSeal is a versatile and easy-to-use flashing repair system that, when dry, forms a flexible, waterproof membrane. It’s formulated for permanent adhesion to asphalt shingles, metal flashings, brick, and other chimney and roofing materials. Use FlashSeal to solve problem leaks around the base of chimneys, stacks, and vents. It is also great for sealing around skylights.
  • 7 Year Warranty
  • Stops Leaks Around Chimney, Stacks, and Vents
  • Stays Flexible Over Time
  • Available In Black, Brown, and White
  • Easy Brush-on Application
  • Soap And Water Clean-up
Close

FlashSeal Fabric

Use FlashSeal Fabric with FlashSeal Elastomeric Flashing Sealant for added strength and stability to your flashing repairs.
  • Mesh fabric can be used between layers of FlashSeal to strengthen repair
  • Available in rolls 6" x 150'
Close

HeatShield Cerfractory Flue Sealant

Your chimney may look good on the outside, but have hidden dangers on the inside. Damaged chimney liner? HeatShield® can restore your chimney's clay flue liner and save you the expense of rebuilding or relining with a stainless steel chimney liner. HeatShield is a chimney liner repair system that eliminates the hazards and draft problems caused by gaps, cracks and spalling in otherwise sound masonry chimneys. HeatShield Cerfractory Flue Sealant is a professionally applied product available through our factory trained chimney professionals.
Close

HeatShield Cerfractory Foam

HeatShield Cerfractory Foam is an insulating, high-temperature refractory mortar, developed specifically for spray coating smoke chamber walls. When properly applied, it will restore the integrity of your fireplace. This product will insulate, seal gaps, and smooth the smoke chamber walls as required by both NFPA and IRC codes.
  • Listed to UL 2505 Zero Clearance to Combustibles
  • Insulates Fireplace Smoke Chambers for Added Safety
  • Smoothes Jagged Edges, Corbels and Reshapes Smoke Chambers for Increased Performance
  • Insulates from Heat or Cold
  • Resists Temperatures Up To 2550° F
  • Expands Up To 50% More Volume for Better Insulation
  • Sprayable – No Need To Demolish the Damper and Firebox to Gain Access
  • Repairs Any Brick Block or Stone Exposed to High Temperatures
Close

HeatShield Formula 51

HeatShield Formula 51 is an insulating, high-temperature refractory mortar, developed specifically for parging smoke chamber walls. When properly applied, it will restore the integrity of your fireplace. This product will insulate, seal gaps, and smooth the smoke chamber walls as required by both NFPA and IRC codes.
  • UL Listed  (Smoke chamber surfacing materials MH64629)
  • Insulates Fireplace Smoke Chambers for Added Safety
  • Smoothes Jagged Edges and Corbels and Reshapes Smoke Chambers for Increased Performance
  • Insulates from Heat or Cold
  • Sticks to Most Anything
Close

HeatShield Smoke Chamber Sprayer

This smoke chamber sprayer is used to apply the HeatShield Cerfractory Foam product to smoke chamber walls. It must be used with a compressor with a minimum 5.0 CFM @ 50 PSI. For more information, or where to purchase this sprayer, contact us at (800) 860-6327.