Sorbent Pads
Sorbent Pads are great for protecting roof shingles from ChimneySaver overspray. When spraying ChimneySaver through a pump-up sprayer, overspray that is allowed to dry on the roof can discolor shingles, making dark spots appear where overspray lands. This soft, absorbent material prevents overspray from soaking through and are designed to stick to the roof without sliding off. Sorbent Pads are available in packs of six. Don’t forget these when doing your next ChimneySaver job.
Related products
ChimneySaver Water Repellent for Block Chimneys
ChimneySaver Water Repellent for Block Chimneys protects vertical exterior, block chimneys. It is ideal for very porous masonry surfaces.
- 7 Year Warranty
- 100% Vapor Permeable
- Non-Glossy Look
- Excellent for Use on Very Porous Masonry Surfaces
- Combines the Advantages of a Breathable Water Repellent and a Film-Forming Sealer
- Efflorescence/Stain Protection
- Freeze/Thaw Protection
CrownPrep Masonry Crown Conditioner
ChimneySaver CrownPrep is a proprietary water-based acrylic conditioner. CrownPrep conditions and consolidates nearly all porous cement/mortar crown washes prior to application of products such as CrownSeal and CrownCoat. CrownPrep is used prior to application of CrownSeal, CrownCoat, and other water-based, mastic-type crown repair products.
- Preps & Consolidates Existing Crowns
- Improves Performance Of Repair Coatings
- Easy Brush Application
- Environmentally Friendly
ChimneySaver RTV
ChimneySaver RTV is a clear, solvent-based silicone elastomer formulated for concrete block and other highly porous masonry with minimal altering of the natural appearance.
- Effective on hard-to-seal surfaces
- Controls water penetration
- Controls moisture related staining
- UV and temperature stable
- Ten-year warranty on vertical surfaces
- Provides durable water repellent protection
- 100% water vapor permeable
- Bridges hairline cracks
CrownSeal Trowelable Sealant
CrownSeal is a proprietary elastomeric coating that forms a flexible, waterproof membrane specifically formulated to repair and protect chimney crowns from water intrusion. This thicker material can cover larger cracks in chimney crowns and is applied with a trowel.
- 10 Year Warranty
- Permanently Flexible
- No Bonding Agent Required
- Natural Concrete/Mortar Look
- Ready to Use
- Environmentally Friendly
ChimneySaver Water-Base Water Repellent
ChimneySaver Water-Base Water Repellent is a penetrating, V.O.C. compliant, water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Base Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Base Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
- 10 Year Warranty
- VOC Compliant in All States
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence Protection
- Freeze/Thaw Protection
- Can Be Used On Most Vertical, Above-Grade Masonry
Brick & Mortar Cleaner
Brick & Mortar Cleaner is a breakthrough in cleaning masonry. It has the cleaning power of muriatic (hydrochloric) acid, yet when used as directed, it won’t produce toxic fumes or cause burns. Now you can have the cleaning performance of a powerful acid cleaner with an unprecedented level of safety to users and surrounding surfaces.
- Safer to Use Than Muriatic Acid
- No Harsh Fumes
- Not Likely to Cause Acid Burns
- Same Cleaning Power As Muriatic Acid
- Removes Rust, Efflorescence and Mortar Spatter
FlashSeal Fabric
Use FlashSeal Fabric with FlashSeal Elastomeric Flashing Sealant for added strength and stability to your flashing repairs.
- Mesh fabric can be used between layers of FlashSeal to strengthen repair
- Available in rolls 6" x 150'
Powdered Water Repellent (PWR) Mortar Additive
Save money by adding PWR to mortar/concrete mixes for all your repairs, tuckpointing, and rebuilds! Adding our Powdered Water Repellent (PWR) makes mortar/concrete permanently waterproof. This means no return trip to waterproof the chimney. When tuckpointing, just add PWR to your mortar mix.
- Masonry Walls Can Be Waterproofed the Same Day
- Permanent Water Repellent Protection
- Will Not Alter Surface Color or Appearance
- Mixes Easily With Dry Mortar, And/Or Cement
- Helps Control Efflorescence
Reviews
There are no reviews yet.