Siphon Pump
Save money and buy ChimneySaver products in bulk 30 and 55 gallon drums. Use this siphon pump with 30 and 55 gallon drums to siphon ChimneySaver into smaller containers to take to the jobsite.
Category: ChimneySaver
Tag: Tools
Be the first to review “Siphon Pump” Cancel reply
Related products
ChimneySaver Water-Base Water Repellent
ChimneySaver Water-Base Water Repellent is a penetrating, V.O.C. compliant, water repellent which contains a proprietary modified siloxane. This water-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Base Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Base Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
- 10 Year Warranty
- VOC Compliant in All States
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence Protection
- Freeze/Thaw Protection
- Can Be Used On Most Vertical, Above-Grade Masonry
ChimneySaver VOC Compliant Solvent Base Water Repellent
ChimneySaver VOC Compliant Solvent Base is great for initial treatments and re-applications. It is 100% vapor permeable, which means it won’t trap water vapors that may pass through the bricks when the chimney is in use, unlike other products found in most hardware or home improvement stores. Those products, when applied to a masonry chimney, can actually slow down water vapors as they pass through the chimney, which leads to water damage.
- 10 Year Warranty
- VOC Compliant in All States
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence/Stain Protection
- Freeze/Thaw Protection
- Can Be Used on Previously Treated Surfaces
- Can Be Used on Driveways and Sidewalks
CrownCoat Brushable Crown Repair
Because of its unique ‘quick drying,’ water-based technology and its easy brush-on application, CrownCoat Brushable Sealant has become a favorite among chimney professionals. CrownCoat is premixed and can be used wherever a long lasting waterproof membrane is needed. Fill larger cracks and voids with patching cement or high quality caulk, then apply two coats of CrownCoat.
- 15 Year Warranty
- Permanently Flexible
- Completely Cures In 2 – 4 Hours
- Easy Brush-On Application
- Ready to Use
- Environmentally Friendly
All Weather CrownCoat
All Weather CrownCoat (formerly Cold Weather CrownCoat) is a brushable, elastomeric coating that, when cured, forms a flexible waterproof membrane designed to repair and protect chimney crowns from moisture intrusion. The unique Freeze-Cure™ technology in All Weather CrownCoat allows the product to cure naturally in above freezing temperatures or to undergo accelerated “freeze-curing” in below freezing temperatures.
- 10 Year Warranty
- Permanently Flexible
- Can Be Used In Temperatures to -40° F
- Easy Brush-On Application
- Ready to Use
- Water Based/Environmentally Friendly
Sorbent Pads
Sorbent Pads are great for protecting roof shingles from ChimneySaver overspray. When spraying ChimneySaver through a pump-up sprayer, overspray that is allowed to dry on the roof can discolor shingles, making dark spots appear where overspray lands. This soft, absorbent material prevents overspray from soaking through and are designed to stick to the roof without sliding off. Sorbent Pads are available in packs of six. Don’t forget these when doing your next ChimneySaver job.
ChimneySaver Solvent-Base Water Repellent
Rated 5.00 out of 5
ChimneySaver Solvent-Base Water Repellent is a penetrating water repellent which contains a proprietary modified siloxane. This solvent-based siloxane penetrates masonry up to 1/4 inch or more depending on surface porosity and moisture content at the time of application. ChimneySaver Water-Solvent Water Repellent reacts with the minerals in masonry in the presence of ultraviolet light and atmospheric moisture. This reaction forms strong permanent bonds beneath the surface and creates a hydrophobic zone that prevents water molecules from penetrating, while allowing free migration of water vapors. The chemical bonds formed in this process allow ChimneySaver Water-Solvent Water Repellent to become an integral part of the substrate and provide long term water repellent protection.
- 10 Year Warranty
- 100% Vapor Permeable
- Non-Glossy Look
- Efflorescence/Stain Protection
- Freeze/Thaw Protection
- Can Be Used on Previously Treated Surfaces
- Can Be Used on Driveways and Sidewalks
Powdered Water Repellent (PWR) Mortar Additive
Save money by adding PWR to mortar/concrete mixes for all your repairs, tuckpointing, and rebuilds! Adding our Powdered Water Repellent (PWR) makes mortar/concrete permanently waterproof. This means no return trip to waterproof the chimney. When tuckpointing, just add PWR to your mortar mix.
- Masonry Walls Can Be Waterproofed the Same Day
- Permanent Water Repellent Protection
- Will Not Alter Surface Color or Appearance
- Mixes Easily With Dry Mortar, And/Or Cement
- Helps Control Efflorescence
Brick & Mortar Cleaner
Brick & Mortar Cleaner is a breakthrough in cleaning masonry. It has the cleaning power of muriatic (hydrochloric) acid, yet when used as directed, it won’t produce toxic fumes or cause burns. Now you can have the cleaning performance of a powerful acid cleaner with an unprecedented level of safety to users and surrounding surfaces.
- Safer to Use Than Muriatic Acid
- No Harsh Fumes
- Not Likely to Cause Acid Burns
- Same Cleaning Power As Muriatic Acid
- Removes Rust, Efflorescence and Mortar Spatter
Reviews
There are no reviews yet.