CrownSaver Crown Repair System

CrownSaver is a cement-based coating used to repair major cracks and gaps in chimney crowns. It creates a waterpoof barrier that prevents water intrusion through chimney crowns.

10 Year Warranty
Strong, Cement-Based Long-Term Repair
Waterproof Barrier
Easy Application
Ready to Use

Category: ChimneySaver Tag: Crown Repair

Description
Additional Info

Description

CrownSaver is our original crown repair product that was developed in the early 80s. It has been time tested and is still preferred by many sweeps. CrownSaver is a blend of polymer modified hydraulic cements and powdered water repellent.

For best results, cover the crown with FormFoil, a sticky, rubber-backed, aluminum foil flashing (sold separately in 9”x 50’ rolls). Then, simply mix one scoop CrownSaver (measuring scoop included) with three scoops fine mason’s sand and water. Next trowel over the crown at about 1/2” thickness (¼” min.2” max). Because CrownSaver is a cement-based coating, a ½” bead of caulk should be applied to the base of each flue tile to allow for expansion.

Additional Info

Coverage Rate: 30 sq. ft. per 5 gallons at 1/2″ thickness
Available Sizes: 5 gallon pails
Application Temperatures: 40° F minimum
Application Method: Trowel, masonry finish brush
Dry Time: 4-6 hours (above 40° F).
Cleanup: Remove excess CrownSaver with a stiff nylon scrub brush and water before hardening occurs