All Weather CrownCoat

All Weather CrownCoat (formerly Cold Weather CrownCoat) is a brushable, elastomeric coating that, when cured, forms a flexible waterproof membrane designed to repair and protect chimney crowns from moisture intrusion. The unique Freeze-Cure™ technology in All Weather CrownCoat allows the product to cure naturally in above freezing temperatures or to undergo accelerated “freeze-curing” in below freezing temperatures.

10 Year Warranty
Permanently Flexible
Can Be Used In Temperatures to -40° F
Easy Brush-On Application
Ready to Use
Water Based/Environmentally Friendly

Category: ChimneySaver Tag: Crown Repair

Description
Additional Info

Description

All Weather CrownCoat (formerly Cold Weather CrownCoat) is easy to apply with a 3″ or 4″ brush. All Weather CrownCoat requires no mixing or special bonding agents, and the compounds are solvent free and will not harm the environment.

All Weather CrownCoat can be used wherever a long-lasting, exterior water-proof membrane is needed, such as on chimney crowns, chimney corbels, tops of masonry, or parapet walls. All Weather CrownCoat can be customer colored with small amounts of standard mortar dye. If dyes are used, transfer material to be colored from the original container into a clean mixing container. Add mortar dye one or two drops at a time, and mix with a trowel or paddle mixer and drill until desired color is reached.

WARNING: This product can expose you to chemicals including quartz, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Additional Info

Approx. 28 sq. ft. per gallon depending on thickness of application
Available Sizes: 1 gallon pails
Minimum -40° F and above
Application Method: 3″ – 4″ Paint Brush
Curing Time: 40° F and above: 4 hours approx., 40° F down to 32° F: 24 hours approx., 32° F down to -40° F: 4 hours approx.
Cleanup: Remove All Weather CrownCoat from tools immediately after each use by scrubbing with a brush and water.